Manufacturing Details
Manufactured from selected timber & solid core construction.Doors are framed in seasoned hard wood battens & pressed at high pressure with phenol formaldehyde.

Advantage

• Best of all teak veneer is used on both side of decorative flush door
  
• Chemically treated against termite/borer/Fungus & other organisms.
• Best of all teak veneer is used on both side of decorative flush door
• Anti warp properties to make it dimensionally stable for smooth internal and external use.
• Act as insulation against heat & sound.
  

Application
Flush Door - ideal where water splashing is common such as toilet , bathroom & balcony Doors.Decorative Flush Door - where elegance is required, widely used for entrance, living area doors,Toilet, Bathroom & Balcony Doors.

Technical Details
Test Results
Moisture Content - 5% To 10%
Dimensions & Squarness - Length & width shall be within a limit - should notexceed 6 mm
Impact Test - The Depth of denotation should not be more than 0.2 mm by 500gm steel ball.
Flexure Test -  The deflection at a load of 50kg shall not be more than 1/10 of length & 1/15 of width which ever is less.
Edging Bending Test -  Deflection after applying load of 100 kg should not exceed 5mm. Residual deflection should notexceed 0.5mm & Lateral bending not more than 2mm.
Shock Resistance Tes -  No visible damage after 25 blows of 30 kg bags
Slamming of Shutter -  No visible damage after 50 impacts
Moisture Test -  No deformation
Varying Humidity test -  Recovery of the original size after subjecting the door to high & low humidity is excellent
Glue Adhesion -  Glue line between plywood face & core does not show any signs of delimitation
Knife Test - Excellent
Screw holding strength -  More than 1500 N
Specific Gravity -  0.55 To 0.60
Water absorption - Less then 1 %
Screw withdrawal Test - More than 1000N
Nail holding strength -  More than 500 N